泰信机械 泰信机械

确认
详情

深耕中东拓蓝海 卡底装备筑根基┃泰信卡底KR150C钻机攻克中东复杂地质难题

发布时间：

2025-12-31

近日，江苏泰信机械股份有限公司（以下简称“泰信机械”）研制的卡特彼勒底盘KR150C旋挖钻机在中东某国首都的大型厂房建设项目现场持续高效作业，凭借适配当地复杂地质的优越性能与稳定表现，成为该项目桩基施工的核心设备，彰显了中国工程机械在国际市场的硬核实力。

近日，江苏泰信机械股份有限公司（以下简称“泰信机械”）研制的卡特彼勒底盘KR150C旋挖钻机在中东某国首都的大型厂房建设项目现场持续高效作业，凭借适配当地复杂地质的优越性能与稳定表现，成为该项目桩基施工的核心设备，彰显了中国工程机械在国际市场的硬核实力。

Recently, the KR150C rotary drilling rig equipped with a Caterpillar chassis, independently developed by Jiangsu TYSIM Piling Equipment Co., Ltd. (hereinafter referred to as “TYSIM”), has been operating continuously and efficiently at a large-scale factory construction project in the capital city of a Middle Eastern country. Thanks to its outstanding performance and stable operation tailored to complex local geological conditions, the machine has become the core equipment for pile foundation construction on this project, fully demonstrating the strong competitiveness of Chinese construction machinery in the international market.

厂房建设遭遇复杂地质挑战

Factory Construction Confronts Complex Geological Challenges

此次施工的厂房项目位于中东某国首都城郊，地处约旦裂谷带附近，距离地震活跃的死海断层仅25公里，地质条件极为复杂且存在一定的岩溶风化现象，对桩基施工的设备稳定性、成孔精度和抗震适配性提出了严苛要求。项目负责人介绍，该厂房建成后将用于高端制造业生产，对地基承载力的要求很高，需完成大量对于桩孔垂直度很高的钻孔作业，施工设备的选择直接决定工程进度与质量。

The factory construction project is located in the suburban area of the capital of a Middle Eastern country, near the Jordan Rift Valley, and only 25 kilometers away from the seismically active Dead Sea fault zone. The geological conditions are extremely complex, with certain karst weathering characteristics, posing stringent requirements on equipment stability, borehole accuracy, and seismic adaptability for pile foundation construction.According to the project manager, the factory will be used for high-end manufacturing after completion, which places very high demands on foundation bearing capacity. A large number of drilling operations with strict requirements on pile verticality are required. Therefore, the selection of construction equipment directly determines the project schedule and overall quality.

核心参数：精准适配工程需求，攻克施工难点

Key Parameters: Precise Matching of Engineering Requirements and Overcoming Construction Difficulties

针对此次项目的地质特性与厂房建设的工程要求，泰信机械KR150C旋挖钻机展现了精准的参数适配能力。该设备最大钻孔直径可达1500mm，最大钻孔深度51m，完全满足本次厂房项目桩基直径1200mm、平均钻孔深度35m的施工需求。在软白垩岩与石灰岩交互的复杂地层中，KR150C凭借150KN·m的最大输出扭矩，实现高效破碎与钻进，有效解决了当地岩层风化不均导致的成孔难度大、易塌孔等问题。项目施工方技术总监表示：“KR150C的钻进效率较预期提升了30%的同时，在同等地质条件下，比同类设备更能保证桩孔垂直度，为后续钢筋笼下放及混凝土浇筑筑牢了基础。”

In response to the geological characteristics and engineering requirements of this project, the TYSIM KR150C rotary drilling rig demonstrated highly precise parameter matching capabilities. The rig features a maximum drilling diameter of 1,500 mm and a maximum drilling depth of 51 m, fully meeting the project’s pile foundation requirements of 1,200 mm diameter and an average drilling depth of 35 m.In complex strata with alternating soft chalk rock and limestone, the KR150C, with a maximum output torque of 150 kN·m, achieved efficient rock breaking and drilling. This effectively addressed challenges such as difficult hole formation and a high risk of borehole collapse caused by uneven rock weathering.The technical director of the construction contractor commented:“While improving drilling efficiency by approximately 30% compared to expectations, the KR150C also ensures better pile verticality than similar machines under the same geological conditions, laying a solid foundation for subsequent reinforcement cage installation and concrete pouring.”

性能核心：卡特彼勒底盘赋能 适配复杂施工环境

Performance Core: Caterpillar Chassis Empowerment for Complex Construction Environments

泰信机械KR150C钻机搭载的OEM旋挖专用卡特彼勒底盘，成为其适应当地施工环境的关键优势。现场部分施工区域存在缓坡地形，卡特彼勒底盘带来的强大的爬坡能力，确保设备在不平整场地内依然能够灵活移动、稳定站位。同时，700mm宽的履带板设计与2700-3700mm的可调节履带外宽，大幅提升了设备在软土地层的接地面积，有效避免了施工过程中因地面沉降导致的设备偏移，保障了成孔精度。此外，底盘的高可靠性与稳定性，也适配了当地临近地震活跃带的施工环境，为工程安全提供了双重保障。

The OEM Caterpillar chassis specially designed for rotary drilling rigs, mounted on the TYSIM KR150C, has become a key advantage in adapting to local construction conditions. Some areas of the site feature gentle slopes, and the powerful climbing capability provided by the Caterpillar chassis ensures flexible maneuvering and stable positioning even on uneven terrain. In addition, the 700 mm wide track shoes combined with an adjustable track gauge of 2,700–3,700 mm significantly increase ground contact area on soft soil layers. This effectively prevents machine displacement caused by ground settlement during construction and ensures borehole accuracy. Moreover, the high reliability and stability of the chassis are well suited to construction environments near seismically active zones, providing dual assurance for overall project safety.

行业意义：中小型旋挖钻机成中国智造出海新名片

Industry Significance: Small and Medium Rotary Drilling Rigs Become a New Calling Card for “Made-in-China” Going Global

作为国内专注于工民建及电网适用的中小型旋挖钻机研发制造企业，泰信机械此次凭借卡特彼勒底盘KR150C设备在施工现场的成功应用，进一步打开了中东市场的突破口。近年来，中国工程机械凭借精准的市场定位、定制化的技术解决方案与高性价比优势，在国际市场的份额持续提升。泰信机械国际部负责人表示，未来将持续深耕海外市场，针对不同区域的地质条件与工程需求，优化产品性能并提供定制化服务，让更多“中国智造”的工程机械助力全球基础设施建设。

As a domestic enterprise specializing in the R&D and manufacturing of small and medium rotary drilling rigs for civil construction and power grid projects, TYSIM has further opened up a breakthrough in the Middle East market through the successful on-site application of the Caterpillar-chassis KR150C.In recent years, Chinese construction machinery has continued to increase its share in international markets by leveraging precise market positioning, customized technical solutions, and high cost-performance advantages. According to the head of TYSIM’s International Business Department, the company will continue to deepen its presence in overseas markets, optimize product performance based on regional geological conditions and engineering requirements, and provide customized services—enabling more “Made-in-China” construction machinery to support global infrastructure development.